These are more notes from a Micro-Annex setup session - you'll need either the oper.52.enet file already on the box - some came with 4MB flash or a tftpserver to place the file on and the annex can boot from that.
monitor:: ?
Monitor Commands:
addr [-d] configure the Ethernet interface
boot [-v] [] download and run a file from host or self
boot [-l] [] download, saves to self and run a file from host
config show hardware configuration and rev info
console-baud set console baudrate for remote diagnostics maintenance
erase erase non-volatile memory
help (or "?") print this list of commands
image [-d|] display and/or set the load image & TFTP load/dump names
ipx [-d] set IPX load/dump file server
lat [-d] set LAT key
mop [-d] set MOP load/dump address
net Ethernet standalone external loopback test
ping send ICMP ECHO_REQUEST, host [data size] [npackets]
ports [-d] port tests with current status of ports displayed
sequence [-d|] display and edit the interface sequence
slip [-d] [] configure a SL/IP interface
stats [-slip] display network error statistics
All of the commands will prompt for any additional
information they need, and require no arguments.
monitor:: addr
Enter Internet address [10.120.210.219]::
Enter Subnet mask [255.255.255.0]::
Enter Preferred load host Internet address [10.120.210.5]::
(tftpboot server address on 10.120.210 subnet)
Enter Broadcast address [10.120.210.0]:: 0.0
Broadcast address: 0.0.0.0
Enter Preferred dump address [0.0.0.0]::
Select type of IP packet encapsulation (ieee802/ethernet) []::
Type of IP packet encapsulation:
Load Broadcast Y/N [N]::
monitor:: sequence net self
Interface sequence: net,self
monitor:: net
Is a loopback plug being used ? (y/n) [n]:
Network test - PASSED
monitor:: boot
Enter boot file name [(ip) "oper.52.enet", (mop) "OPER_52_ENET.SYS"]::
Requesting default boot file "OPER_52_ENET.SYS" for MOP/VMS loads and
"oper.52.enet" for all other protocols
Unanswered requests shown as '?', transmission errors as '*'.
Requesting boot from 10.120.210.5 via Ethernet...
Booting BFS file using open delay of 8
Booting from 10.120.210.5
Header received OK. Received data blocks shown as '.'.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . EOF
Annex Command Line Interpreter * Copyright 1991 Xylogics, Inc.
annex: su
Password: (IP of annexbox)
annex# ?
Annex Command Summary
Name Syntax Description
=====================================================================
? ? [] [-m macro] :Display help on Annex commands
admin admin :Enters local administration function
arp arp [-ads] [ ...] :Display/change Ethernet ARP tables
bg bg [-dq] [%][%,+,-,,] :Put a job in the background
boot boot [-adhlqr] [] [file] :Reboot or force Annex dump
compact compact [-s] :Compacts EEPROM; -s shows EEPROM space
control control :Manipulate control lines
cp cp :Copies a file to another file
edit edit :Edit configuration files
fg fg [-q] [%][%,+,-,,] :Return to an established job
hangup hangup [-q] :Hangup and reset an Annex port
help help [] [-m macro] :Display help on Annex commands
hosts hosts [-qaffn] [...] :Display/modify hosts/name servers
jobs jobs :Display current jobs (sessions)
kill kill [%][%,+,-,,]... :Terminate a job
lock lock [] :Lock Annex port
ls ls :Lists the local EEPROM directory
modem modem [-a|l] [type] [type]... :Displays configured modems
more:
more more :List a file to the terminal
mv mv :Renames a file
netstat netstat [-AaCfgimnpQRrSstz] :Display network statistics
passwd passwd :Change Annex password
ping ping [-arv] [ [ [-l ] :Connect to host using RLOGIN protocol
rm rm :Deletes a file(s)
route route [-fF] add|delete ... :Modify the active routing table
slip slip :Convert port to a SLIP interface
stats stats [-scm ]|[-tpo] :Display or Clear Annex statistics
stty stty [parameter [value]]... :Show/Set Annex port parameters
su su :Enter or exit administrative mode
tap tap [-aksvx] :Wiretap a port
telnet telnet [-rsst] [ [port]] :Connect to host using TELNET protocol
who who [[-l] []@ ...] :Show Annex users
annex# ls
696976 unknown modify date/time oper.52.enet
--> R7.0.1 Build #7 Fri Mar 19 08:25:21 EST 1993
annex# admin
MICRO-XL-UX R9.2, 8 async ports, 0 printer ports
admin : port 1-8
admin : set port mode slave
You may need to reset the appropriate port, Annex subsystem or
reboot the Annex for changes to take effect.
admin : quit
annex# edit gateways
Ctrl-W: save and exit Ctrl-X: exit Ctrl-F: page down Ctrl-B: page up
annex 10.120.210.81
net default gateway 10.120.210.5 metric 1 hardwired
end
(enter Ctrl-W)
File gateways saved.
annex# edit rotaries
Ctrl-W: save and exit Ctrl-X: exit Ctrl-F: page down Ctrl-B: page up
admin: 1@10.120.210.81
console2: 2@10.120.210.81
console3: 3@10.120.210.81
console4: 4@10.120.210.81
console5: 5@10.120.210.81
console6: 6@10.120.210.81
console7: 7@10.120.210.81
console8: 8@10.120.210.81
(enter Ctrl-W)
File rotaries saved.
annex# edit config.annex
Ctrl-W: save and exit Ctrl-X: exit Ctrl-F: page down Ctrl-B: page up
%rotary
%include rotaries
%gateway
%include gateways
(enter Ctrl-W)
File config.annex saved.
annex# ls
696976 unknown modify date/time oper.52.enet
--> R7.0.1 Build #7 Fri Mar 19 08:25:21 EST 1993
78 Thu Jun 15 22:19:17 2000 gateways
192 Thu Jun 15 22:20:21 2000 rotaries
53 Thu Jun 15 22:21:02 2000 config.annex
annex# su
annex: ?
Annex Command Summary
Name Syntax Description
=====================================================================
? ? [] :Display help on Annex commands
bg bg [-dq] [%][%,+,-,,] :Put a job in the background
fg fg [-q] [%][%,+,-,,] :Return to an established job
hangup hangup [-q] :Hangup and reset an Annex port
help help [] :Display help on Annex commands
hosts hosts [-qn] [] :Display status of hosts/name servers
jobs jobs :Display current jobs (sessions)
kill kill [%][%,+,-,,]... :Terminate a job
lock lock [] :Lock Annex port
netstat netstat [-AaCfgimnpQRrSstz] :Display network statistics
rlogin rlogin [-l ] :Connect to host using RLOGIN protocol
stats stats [-sm ]|[-po] :Display Annex statistics
stty stty [parameter [value]]... :Show/Set Annex port parameters
telnet telnet [-rsst] [ [port]] :Connect to host using TELNET protocol
who who [[-l] []@ ...] :Show Annex users
annex:
============================ DONE =======================
Power cycle, unplug from port 1 and enjoy.
